Seems that I always forget one or two things when I roll out an update.  Update 2.58-2.59 was no exception.  I had wanted to make the update script automatically choose whether to run the external hard drive or console update paths.  Now, it does.  Along with one or two other minor things.  While I was working on that, I discovered that about 17 of the Visual Pinball tables did not properly display on the console. This problem didn’t occur on the ext. hard drive installation.  Probably due to the fact that the CPU and gfx on the console are Intel 2nd generation, and Windows 10 wasn’t fully supported until 3rd generation. So, I created a second games list, Games-Console that is only the tables that display on the console, and the Games list is the full VP games list.  An example of the way the VP tables that don’t properly display is on the left.  Totally unplayable.  Since all the tables properly display on my Elitebook laptop with NVIDIA gfx, I felt that the proper solution would be to keep them, so that’s why I created the Console games list. That all being said, I must again remind everybody that updates HAVE to be applied in numerical order, or you shall probably break things.  If in doubt, check your version.

Update 2.59-2.61 is HERE.

Previous update blog posts are below:

Update 2.58-2.59 is HERE.

Update 2.56-2.58 is HERE.

FOUR updates (2.40-2.46, 2.46-2.48, 2.48-2.51, and 2.51-2.56) are HERE.

Bit of news here, in closing:  JRod has ordered a spinner for adding to the Tankstick for games like Tempest, Arkanoid, and many others.  I shall let you all know how it goes….