Arcade, Arcade Troubleshooting, Computer - Linux, Computer - Windows

Arcade Troubleshooting Joystick and Gamepad

Leave a comment

This post specifically addresses not being able to make your selection under Maximus Arcade utilizing the joystick or gamepad. I have had a few people mention this issue.  This post doesn’t really apply if you are using a Tankstick in a stand up cabinet or game console.  That is because a Tankstick actually ’emulates’ a keyboard.  However, if you use a game console or external hard drive version with a joystick or gamepad, then this post is for you.  If you are still playing the arcade games with a keyboard, you should check out these two options:  Click HERE for a link to buy a Thrustmaster USB wired joystick like the one pictured above.  Or, if you prefer, you can click HERE for a link to buy a pair of wireless gamepads like the pair pictured above  Both of these options are about $25 with prime shipping.  Once you start utilizing something other than a keyboard to play your games, you will rapidly notice how inconvenient it is to select the ROM using the keyboard.  Much easier to set up the joystick or gamepad to do so.

In order to do this, you will need to enter the Maximus preferences.  Easiest way is to load MA, then hit Ctrl-P.  The preferences utility will load.  I might add that changing the controller prefs, you will NOT need to move the Master ROM List to the top of the games list.  That ‘lock’ only prevents changes to the games lists, not any of the other settings. In the picture just above, you will need to select the Controller tab at the top, and the Joystick tab on the left.  The main thing that HAS to be set is #1 Capture Joystick/Gamepad.  The other settings, #2 through #6 should be fine as they are, but depending on your joystick, you may need to select the other setting in #6.  Something you should do is to select the View tab, like the picture on the right.  This will allow you to know what  buttons are what on your controller.  Necessary, if like me, you need to move a couple buttons around in the configuration.  In my case, using a Thrustmaster, the trigger button was button #1, and the button on top was button #2.  The prefs in the Setup1 and Setup2 tabs were set for button 1 to toggle the Favorites, and the Select was set to button 10, if I remember.  The way to change them around is to highlight the setting then press the little red X at the bottom to delete that button.  Then, you just need to press the button that you want. In the pictures just above, on the left and the right, you will see that I’ve already moved things around so the trigger will select, and the top button will cycle the Favorites.  One other thing to realize that if it’s still not working properly, make sure you don’t have a flight joystick like the Thrustmaster.  If you do, there is usually a side throttle control, mapped to a joystick.  I have taken the liberty to mark it with an arrow in the picture just above on the left.  If that control is moved forward or backward, it will override the joystick being able to select, so make sure it is in the neutral center position.

Hope this posting helps everybody…. 😉

Arcade, Arcade Update, Computer, Computer - Linux, Computer - Windows

Arcade Update 1/2022 B

Leave a comment

If you do NOT have v.2.56 of the Arcade installation, do NOT proceed.

Instead, go here, and apply the four previous updates, and possibly the optional snapshots file:  Arcade Update 1/2022.  (Updates MUST be applied in sequence)  As always, you should perform a backup using your normal PC backup, just in case. (NOT the arcade backup scripts in the installation.)

In the future, you can always just jump to the Arcade Updates  category to check whether you may have missed any updates.  The version that you currently have, whether console or ext hdd, may be checked at G:\version.txt.  I can’t remember, but I think if you have v.2.40, there possibly may be no version.txt.  In the console version, it should report the version number while loading, as long as it’s more recent than v.2.40.

Now that that is all over, here is the download link for the latest Arcade Update file:  Arcade Update 2.56-2.58.  

One note to mention, is that I added a 2 way joystick config for Clowns.  By default, if you check the game’s TAB menu, you will notice that Clowns may be set to Paddles.  You may have to set that to your system as well.  I prefer to take a pic of the settings before I change things on those menus.  These 2 and 4 way joystick configs are most useful if you use an 8 way joystick.

This update also adds a funtion to backup a couple critical 3DArcade directories.

Arcade, Arcade Troubleshooting, Computer, Computer - Windows

Arcade Troubleshooting

Leave a comment

This is a bit on how to troubleshoot issues that you may be having with a Tankstick, by Recroommasters.  It’s a cool joystick/button assembly that will help you to relive a true arcade experience, whether you have the external hard drive, the stand alone console, or arcade cabinet installation of my arcade box. It can be purchased HERE.  😉

First thing to ask is it a button or joystick problem?  If it’s a joystick ‘hanging’ problem, do you have a ‘rom’.ini file in the ini subdirectory for that particular game, addressing the 4 way versus 8 way joystick issue?  So, the first thing to do might be to insure that the tankstick is working properly.

The tankstick basically just emulates a keyboard, so you should be able to just open a blank text file and test button by button, and joystick by joystick to ensure that they ‘type’ the right character.  However, some emulate special keys like ESC, so the diagnostic program might be in order.  You can get it HERE.  No matter which of the three versions of my arcade box you have, in order to run it, you will need the Java Runtime Environment installed.  Download it HERE.  If you are using the external hard drive version, it may already be installed, so you should check.

In checking out your tankstick, you may find that one or more joystick micro switches are not as sensitive as the rest.  So, you may power everything down, turn it upside down, and unscrew the bottom. (The rubber feet do NOT have to be removed, but the little rubber caps on the feet do. Then, when open, adjust the micro switches as the picture on the right. The proper method is to hold the switch closed, and SLIGHTLY bend the arm, in the direction of the arrow, depending on if you want more or less sensitivity.  Don’t worry, this is sanctioned by the manufacturer, and will not void the lifetime warranty.

Also, if a micro switch is bad, there should be spares inside the tankstick.

You shouldn’t need to take your joystick apart, but in case you do, here’s an exploded view on the left.  It also shows you the 4-way/8-way adapter that you reverse if you wish to make them permanent 4-way joysticks. With a little creativity, this would be useful.  You could leave the two center joysticks as 8-way for games like Robotron, and make the two outside joysticks 4-way. However, then with 4-way games, you would have to set MAME to use those as player one/two.  I still prefer my rom.ini file mapping solution.  😉

Now, that you are happy your tankstick is working properly, it’s time to turn our attention to MAME.  As I mentioned before, if it’s a joystick ‘hanging’ issue, make sure you have an .ini file in the G:\MAME\ini\ directory.  The name HAS to match exactly to the name of the rom that you are playing.  If unsure how to accomplish this, you can reach out to me.

The next thing to try is to use the updated X-Arcade controller configuration.  This file is located in the G:\MAME\ctrlr\ directory, and the outdated file is called xarcade.cfg and is from 2007.  There never really was a need to enable this, since the xarcade emulates a keyboard, but using the updated configuration from 2017 might be in order.  You can download the updated file HERE.  Just unzip it, and put X-Arcade.cfg in the directory above.  Then, you have to enable it.  Open the following file G:\MAME\mame.ini file (NOT directory, Jrod, LOL) by right clicking it and selecting EDIT.  Then, look for the section in the pic on the right, and you will make the ctrlr line read just like the example.  Remember, if it seems to make things worse, just blank that line back out.  I recommend copying your mame.ini file somewhere, so you have a backup.  Desktop might be a good place.

Another nice MAME thing to know is how to change your button and joystick mapping.  You can either do that globally, or per game.  I recommend staying away from global changes until you get comfortable. First thing to do is load a game and hit the <TAB> key.  This will bring up the menu on the left.  Cursor down to Input (This Machine) and press ENTER.  Then, the menu on the right will appear.  You will notice the in this example, there is only one joystick.  That is because on my test console, I only have one USB joystick attached.  I RECOMMEND TAKING A PICTURE OF YOUR SETTINGS, SO YOU CAN ALWAYS GO BACK.  Easy to forget. So, the way you change the P1 UP line is as follows:

To add something to the end, you hit ENTER, then you just press that key or move that joystick, so to add joystick3 up to that line, just move joy3 in the up direction. Do that for the four directions, and you can use joy3 just like joy1 in order to test.

In order to go back, you need to blank the line.  Do it this way: Hit ENTER on the line, then quickly hit the ESC key.  That blanks out the line, then Hit ENTER, and cursor up, then ENTER and joy1 up, etc.  Hope this makes sense.  One note, and it’s IMPORTANT.  If your ESC key delay is set to 0 in the Maximus Arcade prefs, you will need to set it to 1 or 2, otherwise when you blank a line, you will exit the rom and you will need to reload it.  Annoying.

Well, I hope that’s given everybody some tips on troubleshooting this Arcade setup.  I’ve already posted the first four updates of the v.2.xx install, with another that will  be released shortly. This is always the way it seems to work.  Release one or more updates, and it spawns another one.  Oh well, keeps me busy in retirement.  😉

Arcade, Arcade Update, Computer, Computer - Linux, Computer - Windows

Arcade Update 1/2022

Leave a comment

Happy New Year!!

This blog post is to release the first four updates of Arcade v2.40, and updating to v.2.56.

Arcade 1.00 was released on Nov. 2015, and was the beginning of the realization of the dream I had for an arcade experience encompassing several different gaming platforms.  This was updated on 6 Feb 2021 to version 2.00, and I managed to get all users updated to this version. (I managed to get all users upgraded to v.2.40 in Mar. 2021.)  I believe it was v.1.30 in Sep 2020 that I added console/arcade cabinet installations as well as the external hard drive version.

I have actually even tested Maximus front end under a recent Fedora Linux distribution using Wine.  I was using a USB Thrustmaster joystick. This was with the external hard drive version, mapped to G: under Wine. If you need a Maximus key, you can find it HERE.  Seems every time I check, it’s always on sale for $9.99.

One notable thing to mention, is that besides the Maximus frontend, there is also another one, that I never really configured.  3DArcade.  I have spent  quite a bit of time configuring it.  I have stayed in Arcade>Favorites, if my memory is correct. (Meaning, you run 3DArcade, then click Arcade, then click Favorites.)  3DArcade is a ‘virtual’ experience. If you would like to see a particular cabinet added to that arcade, just give me a shout. 😉

Back in the v.1.xx days, updates were hosted on mega, and emailed out.  Now, since most Arcade users are blog members, I will just post the mega update links here.  Also, the user had to ‘hand update’ the installation.  Now, under the v.2.xx updates, I have created update script .bat files that will do all the work for you!!

First, a little background on how the updates actually work now.  Each update file is a zip within a zip.  You must expand them both.  Then, you should read the ‘README UPDATE.txt’ file, which usually just tells you to run the ArcadeUpdate.bat file by just double clicking it.  If there are any other things that need doing, they will be spelled out here, as well as in the README UPDATE.txt file.  Information on exactly what the update does is found in the WhatNew.txt file.  However each update needs to be done, with none skipped. Update files need to be done in succession.  Meaning, if you have version 2.40, you need to perform update 2.40-2.46 first.  Then, the 2.46-2.48 and so on.  In later versions of the console, it will report the version upon booting.  For the ext hdd version, you would find version.txt in the root G: drive.

I STRONGLY SUGGEST backing up your installation using whatever you use to back up your computer BEFORE attempting an update, in case things go sideways.  You have been warned!!

The Update 2.51-2.56 contains TWO scripts, that MUST be run in order, and the first one needs to be run as administrator.  Otherwise your installation will not work at all.

Okay, what you’ve all been waiting for, here are the links for the update files.  (Clicking on them, will open a new tab.)

Update 2.40-2.46

Update 2.46-2.48

Update 2.48-2.51

Update 2.51-2.56

Snapshots Addon for 2.51-2.56

The Snapshots Addon can be expanded into the snapshots-hold directory under WinUAE on your G: drive by hand, or, copied into that same directory in the update architecture.  (Doing that, will just slow the update down, so be patient, if you do that.)  Or, you can omit that Addon completely, as the end user may not need it.

Another notable addition in the 2.51-2.56 update was a bug reported by Jrod and his brother concerning the fact that certain MAME roms would ‘hang’ upon anticipating a joystick movement.  This was tracked down to the difference between 4 and 8 way joystick mappings.  So, I created some custom mappings for certain problematic games like DigDug, and Ms. Pacman and more.  If anybody has any issues with any particular game, feel free to reach out to me.

If you don’t understand all of this if this is your first update, don’t hesitate to reach out to me via text, email, facebook, or phone.  Keep your eyes on this blog for any future updates…. 😉

 

Tech, music, and general ramblings…..